GenesisZr® 4Y+ (ST1100)
Our high translucency Zirconia Milling Disc, combines beauty and strength providing 48% translucency and 1,100Mpa flexural strength. Available in Classic White GenesisZr® 4Y+ (ST1100) Zirconia is made in the USA from Tosoh Powder and is recommended for all indications. Please see the GenesisZr® 4Y+ (ST1100) Zirconia instruction sheet for Indications for Use and other details.
Available In:
- 98 mm x 12 mm
- 98 mm x 14 mm
- 98 mm x 16 mm
- 98 mm x 18 mm
- 98 mm x 20 mm
- 98 mm x 22 mm
- 98 mm x 25 mm
Instructions and Specifications
Coloring Instructions
To Color GenesisZR® ST1100:
- Apply one coat of AMS incisal tone to incisal 3rd where desired for enamel effect.
- Dip restoration in Origin Chroma liquid for 1:00 minute.
- Remove excess liquid immediately using compressed air or a paper towel.
- Dry under a heat lamp for 15 minutes before loading into a sintering oven.
Sintering Instructions
Material Final Temperature:
GenesisZr® 4Y+ (ST1100) Zirconia 1500°C
Heat Rate of Furnace:
Ambient - 1220ᵒC – (12ᵒC per min to 1220ᵒC)
For anything up to and including 5 unit bridges:
12°/min - 1220° - 45min hold
3°/min - 1320° - No hold
12°/min - 1465° - No hold
8°/min - 1520° - 150min hold
Cool at 15°/min to Room Temperature
For bridges 6 units and higher:
7°/min - 1220° - 45min hold
3°/min - 1320° - No hold
7°/min - 1465° - No hold
5°/min - 1500° - 150min hold
Cool at 8°/min to Room Temperature
Learn More
Get Started With GenesisZr® Today
We're confident that GenesisZr® will transform your dental lab, save you money and produce high-quality restorations.